Changsha Kaienli Hydraulic Technology Co., Ltd.
Establishing a high-quality spirit , draw a world blueprint !
Add to Cart
Product Pictures:
KPV72-30A hydraulic solenoid valve , proportional flow valve , ER DG connector 12V 24V 13V 27V proportion valve
Technical parameters:
1. Working pressure: Oil port ①: 240 bar (3500 psi); Ports ② and ③: 207 bar (3000 psi)
2. Flow regulation in the three-way mode: Range A: 57 lpm (15 gpm) Range B: 38 lpm (10 gpm)
3. Maximum input flow rate in three-way mode: Range A and B: 114 lpm (30 gpm) maximum in two-way mode
Flow rate: Range A: 53 lpm (14 gpm) Range B: 31 lpm (8 gpm) Note: To increase the two-way flow rate
Control the flow rate, refer to KPV72-20 model. Internal leakage: 207 bar (3000 psi) when the valve is fully closed
At pressure, it is 0.38 lpm (0.1 gpm).
4. Electrical characteristics: 2 voltage standards
5. Medium: Mineral oil with a viscosity between 7.4 to 420cSt (50 to 2000ssu) or synthetic oil with lubricating properties
6. Valve hole: VC12-3;
Working principle:
KPV72-30 will adjust the flow rate of oil port ③, which is not affected by the working pressure of the system. As the current in the solenoid valve increases, the output flow of KPV72-30 will also increase. Note: If the priority flow port of the equipment is closed by an external valve, and this valve is used for bypass flow control, if a small amount of leakage does not occur at the priority oil port, the bypass pressure drop will increase. Please consult the factory. Emergency manual operation: When starting, rotate clockwise for about 1 turn to reach the starting point. Continuing to rotate for about 5 more turns can achieve maximum displacement. At the end: Rotate counterclockwise for about 6 cycles until it stops in the forward direction.
Product technical data:
Product real pictures :
Company Exhibitions:
Our Certificate:
Product processing procedures:
Our new factory and workshop :
Our warehouse:
Shipment:
| Type 1 | soloenid valve |
| Type 2 | manual cartridge valve |
| Type 3 | 2 way 2 position solenoid valve |
| Type 4 | 2 way 6 position solenoid valve |
| Type 5 | 2 way 8 position solenoid valve |
| Type 6 | Pilot oil resource valve |
| Type 7 | explosion proof valve |
| Type 8 | balance valve |
| Type 9 | check valve |
| Type 10 | Hydraulic lock |
| Type 11 | Valve manifolds |
| Type 12 | valve block |
Welcome your visit and inquiry !